BSMC Gear Guide #27
By Gareth Roberts - 27 Sep 14
![BSMC Gear Guide #27](http://bikeshedmoto.co.uk/cdn/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c_1400x.gif)
LEWIS LEATHERS BRONX JACKET NO.384
Formed in 1892, Lewis Leathers are the oldest British motorcycle clothing company, who for over a century have been providing protective clothing for aviators, motorists and motorcyclists. Their landmark Bronx leather jacket was one of the first products aimed at the post-war teenage fashion market, and was adopted by the Ton-up boys and Rockers of the 1960s, becoming closely associated with the 59 Club.
The Bronx was launched in May 1956, as an update of the 1930s flying jacket. The Bronx was to become the Britsh equivalent to the iconic Schott Perfecto jacket made famous by Brando in “The Wild Ones”. In the cafe racer explosion of the time many young riders were influenced by the riding style of their racing heroes, which was crouched right over the tank, arms forward holding onto clip-on handle bars. In order to wear an American style jacket, various modifications needed to be made such as expansion pleats down each side of the back and the buckle had to be covered in leather, as the brass buckles found on most American styles would have scratched the tank. The Bronx became the jacket of choice for the rocker generation and is still in production nearly sixty years later.
Made from heavy quality leather it has a scarlet lining and a double breasted asymmetric zip up front. It is a slim fit with an adjustable built-in half belt with a leather covered buckle. The Bronx can be bought off the hanger in the Lewis Leathers shop or online, or can be custom ordered in black, brown, navy, blue, turquoise, green, red, or white, and with stripes and/or contrasting arms. They can also be bespoked sized to a customer’s exact specification.
The Bronx is a tough, iconic jacket that will last a lifetime if looked after. Good vintage examples of the Bronx sell for more than a new one. The Bronx is a true classic.
http://www.lewisleathers.com
BELL MCQUEEN 1964 ISDT HELMET
This classic design, which was created by the famous pin-striper Von Dutch, was commissioned by McQueen for the entire American Vase team that competed in the 1964 ISDT in East Germany.
McQueen was a world class rider and warranted his place on the team, even though he eventually crashed out and failed to complete the event. It was no disgrace, as Bud Elkins did likewise.
When McQueen gained his place on the team, he took on the responsibility of presenting the team to the world. He got smart suits for all the participants, and had Von Dutch design their helmets.
It has become one of the most iconic helmet designs in motorcycling.
Bell also supply the helmet in Gulf Racing colours, which never featured on any of McQueen’s motorcycle helmets. It is, however, a highly evocative colour combination that will forever be associated with McQueen when he played the driver Michael Delaney in the classic racing movie Le Mans. They offer the helmet with the number from McQueen’s Porsche, the number 20. Or, for no extra cost, you can specify any other one or two digit racing number.
With no less than four different shell sizes, this is a helmet that will always sit close to the head and look totally right. Twin shell system made of composite fibre internal shell for energy absorption and a resin outer shell for resistance. It has a genuine leather interior and quality Italian fabric. It features quick release fastening system and has a removable peak included. It comes with helmet bag.
This helmet passes standard ECE 22.05 for motorcycle helmet use in the EU. It is J graded, as it has passed the ECE 22.05 standard as an open face helmet.
http://www.motolegends.com/helmets/bell/mcqueen-1964-bell-isdt-helmet.html
IRON HEART IHSH-72 HEAVY BUFFALO CHECK WESTERN SHIRT
Autumn is upon us and a t-shirt underneath a leather jacket is not enough. A flannel shirt is ideal, but it better not be one of those cheap flimsy sweat shop numbers if you have any hope of keeping warm.
Iron Heart, in their normal tradition of obsessive over-engineering, have produced a red and black ultra heavyweight buffalo check flannel. It’s fastened with lack Iron Heart logo'd Permex snaps with a button at collar. The fabric single brushed on face, and double brushed on reverse and is one-washed, so there’s minimal if any shrinkage.
iron Heart is born out of the collaboration of Shinichi Haraki and Giles Padmore, with the mission to create high quality, limited run, ethically manufactured, durable clothing with an emphasis on biker-centric designs. Iron Heart garments are in the main made from heavyweight fabrics, designed to be durable, and to some extent protective for bikers. Iron Heart clothing is classic in materials and styling.
Iron Heart state “This is not reproduction clothing; rather the study of classic denim and workwear styles and constructing them for today’s lifestyle. No attention is paid to fashion trends.”
The mills and workshops used are mostly small and family-run, whose deep pride in their products matches that of Giles and Shinichi.
This shirt comes at a premium, but you buy in the knowledge that you won’t find a better flannel anywhere.
http://www.ironheart.co.uk
BILTWELL PRIME CUT VEST - BLACK
Those fine fellows at Biltwell confidently assert “You can search haberdasheries and mega malls from Buffalo to Bass Lake and you won't find more features, higher-quality construction, a better fit or more enduring style than our Prime Cut vest.”
Whether you want to wear this under your Lewis Bronx or over your Iron Heart flannel, this is the business. A no-nonsense vest this comes in bullshit resistant, black on black.
The vest is hand sewn and pattern graded in Los Angeles, CA, USA. It’s double-stitched at all stress points and critical seams with denim-lined slash pockets with internal snap enclosure on sides. It features denim-lined patch pockets with button flaps on chest.
It’s constructed in Heavy 13.5 oz. denim construction with rugged 100% cotton poplin lining. It has a plated brass grommet inside left breast pocket for ear bud wire and a button cinch adjusters on the waist. It’s fastened with antique nickel buttons with subtle Biltwell branding in key locations. It’s machine or hand wash in cold water, air dry.
Bitlwell are a brand that grew out of the new wave custom scene, and are bike builders and riders to the man. I met main man Otto at the Brooklyn Invitational last weekend, and he's the real deal.
http://www.biltwellinc.com/
LOWBROW CUSTOMS PREMIUM THERMAL HOODED SWEATSHIRT
I also met another top bloke called Tyler Malinky at the Brooklyn Invitational, and stared in awe at his two engined Triumph sprinter on display. Here is a bike builder who wears his heart in his ink, literally: ”I figured I could tattoo my hands and that would ensure I do something on my own and not be complacent—no one else would hire me." He set up Lowbrow Customs in Hinkley, Ohio, with partners Kyle and Katie. They builds amazing bikes and some pretty cool apparel too. They also tool and sell some slick trick bits for aspiring builders and pros alike.
These premium thermal hooded sweatshirts feature a 6 oz. 100% cotton thermal exterior bonded to a 5.5 oz. polyester sherpa bonded interior for an 11.5 oz. total weight. The fit on these sweatshirts is great, with 1x1 ribbing on the extra long cuffs, heavy gauge flat drawcord, and #5 nickel kissing zipper. Discharge front and back imprint for that vintage look and feel. This is a perfect winter hoodie whether you loitering around the workshop considering spinning a spanner, or layering up for a brisk cold weather blast!
http://www.lowbrowcustoms.com/
![BILTWELL-PRIME-CUT-VEST-BLACK-1](https://cdn.shopify.com/s/files/1/0441/8895/8871/files/BILTWELL-PRIME-CUT-VEST-BLACK-1-700x500.jpg)